Hi Dan
Did try to unscrew the capsule but after 1/2 hour gave up, then spent
the next 1/2 hr screwing it back. Very, very fine thread.
David
Dan Dugan wrote:
> David wrote,
>
> >I have a pair of WL183's recording and using PIP on a Sony MZ- RH10. One
> >of the mics decided to play up. The problem is the only sound I can get
> >is humming with the occasional crackling. Can get a thud noise when give
> >the mic a good tap.
> >
> >What happened. Did some fiddling around with both mics on the Fri.
> >night, getting ready to go away for the weekend. On the Sat morning when
> >recording, only 1 mic was working. After some checking, both connections
> >were working ( swapped the mics over). Later in the day the a wire on
> >the connection on the good mic did go. Swap connections over, which got
> >me through the weekend. On the bad mic, there was a lot of crackling
> >coming through when recording which was expected.
> >
> >Do I assume the worse? Any advise appreciated.
>
> Try swapping the capsules; they unscrew. That will tell you whether
> it's the capsule or the body/cable that's a problem.
>
> If the capsule's good, the solder joints in the connector would be
> the prime suspect.
>
> -Dan
>
>
>
>------------------------------------------------------------------------
>
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: 9/06/06
>
>
----------
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: 9/06/06
|