naturerecordists
[Top] [All Lists]

Re: Bruce's Stereo Array test (was The right stereo setup

Subject: Re: Bruce's Stereo Array test (was The right stereo setup
From: "Rob Danielson" danielson_rob
Date: Wed Jun 21, 2006 8:38 pm (PDT)
Hi Bruce--
Probably something a bit more massive than foam. There are different
theories about the material and sizes and these could be other test
variables, but I'd look at the suggestions for Jecklin discs for
starters. Dan Dugan has been experimenting with this and he may have
some specific suggestions. With Curt Olson's double boundary rig, he
places omnis, front-facing, next to two, hard surfaced, wood
boundaries. The two boundaries are separated about 4" so the capsules
are around 6-7". I'll dig-up Curt's photos. Rob D.


At 7:31 AM -0600 6/21/06, Bruce Wilson wrote:
>Here's a description of the of the Faulkner phased array:
>http://www.sengpielaudio.com/TonyFaulknerPhasedArray06.htm
>
>I don't have a baffle to go between the mics, so I might use a tree, or
>maybe the foam from a Pelican case. Any other ways to jerry-rig a disc?
>
>Bruce Wilson KF7K
>http://wilson.dynu.net



<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU