I have confirmed by building Robs diagram for the WL183 and it works fine.
If you want or need to use it with a battery box that is not hard
either. It does add the weight and cost of the box, battery
connector, two line capacitors, one resister on the battery and a
capacitor on the battery as well. If you want a range of values for
building one I can draw something and e-mail you off list.
Rich
PS for Rob. Someone unknown idiot released Wild Pig into Crawford
County, WI. There is now a self sustaining population of about 150 and
they likely are on their way to Lafarge in the next few years if not
controlled by then. If you want to record them you should try before
the DNR and others manage to kill them.
--- In Rob Danielson <> wrote:
> Hi David--
> Is there a chance you'll use the WL's just on a minidisc or other PIP
> recorder? If so, the way I prefer to wire them is to cut off the four
> pin connectors on the end the c-122 cables and solder both cables
> into one stereo 3.5mm miniplug. Cuts down on bulk.chance of extra
> interference and costs less. Here are the instructions for this:
>
>
< http://www.uwm.edu/~type/Mic%20Preamps/ShureWR-183WiringNoTA4M's.jpg >
> Should work fine on your MZ N1 HiMD recorder. Let me know. Rob D.
>
________________________________________________________________________
________________________________________________________________________
|