naturerecordists
[Top] [All Lists]

Re: Shure 183 update

Subject: Re: Shure 183 update
From: "digidandy" <>
Date: Thu, 23 Dec 2004 17:53:37 -0000
I'm getting curious about these mics, since I've had to cancel my
Sound Professionals order (they can't deliver their CMC-series anymore).

However, I'm an idiot with the soldering iron, so would I be safe if I
buy a couple of 183s and a "Dual Mono XLR-3 Female to 3.5mm Stereo
Plug" from Sonic Studios?

http://www.sonicstudios.com/access.htm#adapters

Thanks!

=D8.


> cut off the mini xlr's and solder the C122 cables directly to a 3.5mm
> stereo plug. (Very easy to do once you get those stubborn jackets off
> of the black and red leads.)
>
> http://www.uwm.edu/~type/Mic%20Preamps/ShureWR-183WiringNoTA4M's.jpg
>






________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU