Re: Sharp minidisc MD DR7

[Dan Dugan <>]

Vicki Powys, you asked,

>What is the best way then to connect a 3-pin professional mic (e.g. a
>Sennheiser K6 series mic) to a consumer minidisc?  Do you just use an
>adapter lead or is it more complicated than that?  (I now gather from Rich,
>Martyn and others that the "plug-in power" presents no problem for pro mics
>- thanks for that information guys!)

I just use an adaptor. For a mono mic, pin 2 to both tip and ring of 
the mini-phone plug (left and right inputs), pins 1 and 3 to the 
sleeve (ground).

Some people make adaptors with capacitors to block the plug-in power, 
but I've never worried about it and never had a problem.

-Dan Dugan


________________________________________________________________________
________________________________________________________________________