With some work, yes
--------------------------------------------
On Sun, 11/3/13, Jonathan Leslie <> wrote:
Subject: Re: [ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical network stacks?
To:
Date: Sunday, November 3, 2013, 5:00 PM
Ok, I'm sitting
here with my ts-7500 board, it has 2 usb ports and an
ethernet port on it (and usb-b port.) Can I get
two of these:
http://www.amazon.com/Apple-MC704ZM-A-Ethernet-Adapter/dp/B00486070K
and
end up with 3 networks, like I want? I can write 3 c
programs all trying to talk to node 1.1.1.101/1111, all
listening on 1.1.1.201/2222, but have all 3 programs on
different ethernet cards, (eth0, eth1, eth2???) so that each
program is none the wiser about the other ethernet
devices/cards/whatever?
From: Walter Marvin
<>
To:
Sent: Sunday,
November 3, 2013 7:11 PM
Subject: Re:
[ts-7000] RE: ts-7800 how do I make 4 (at least 2) identical
network stacks?
No you still need on physical interface per box.
But if you run of of Ethernet interfaces, you can use USB,
if they are available in addition to the Ethernet
interfaces
--------------------------------------------
On Sun, 11/3/13, Jonathan Leslie <>
wrote:
Subject: Re: [ts-7000] RE: ts-7800 how do I make 4 (at least
2) identical network stacks?
To: ""
<>
Date: Sunday, November 3, 2013, 3:57 PM
those are pretty
small too. I could even use my ts-7500 for that. so
I
could set up 4 networks on the
usb-ethernets?
From: Walter Marvin
<>
To:
Sent: Sunday,
November 3, 2013 6:16 PM
Subject: Re:
[ts-7000] RE: ts-7800 how do I make 4 (at least 2)
identical
network stacks?
To simplify you need on pyhsical Ethernet port
per box, in a pinch you could use USB to Ethernet
converters, and setup your USB devices as Ethernet
--------------------------------------------
On Sun, 11/3/13, Jonathan Leslie
<>
wrote:
Subject: Re: [ts-7000] RE: ts-7800 how do I make 4 (at
least
2) identical network stacks?
To: ""
<>
Date: Sunday, November 3, 2013, 2:26 PM
Oh bugga, I flipped
the numbers. I do apologize. I mean this
one: TS-8700-4710
http://www.embeddedarm.com/products/board-detail.php?product=TS-8700-4710
From: Joel Morgan
<>
To: ts-7000
<>
Sent: Sunday,
November 3, 2013 5:22 PM
Subject: [ts-7000] RE: ts-7800
how do I make 4 (at least 2) identical network stacks?
On the ts7800 page it shows just one
eth port (nic things):
http://www.embeddedarm.com/products/board-detail.php?product=TS-7800
On Sun,
Nov 3, 2013 at 3:04 PM, Jonathan Leslie
<>
wrote:
Ok, so
we have alot of pieces, will the ts7800 handle four
"iproute2" does it have 4 NIC things?
Can
I
get this done with just the one ts7800?
--
Joel R. Morgan
Morgan
Millwright Services, Inc.