ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: New to TS-7300

To: "" <>
Subject: Re: [ts-7000] Re: New to TS-7300
From: harry olar <>
Date: Thu, 20 Dec 2012 05:49:08 -0800 (PST)


You have to copy in the root folder .
If you notice , when you unzip the crosstool it already had the path starting with /opt wich is in the root folder ( c:\\Cygwin)

Then when you compile change the path of the compiler in your makefile to point to the crosscompiler  (it shoild look like  CC=gcc change it to  CC= /opt..../)




From: Asim <>
To:
Sent: Thursday, December 20, 2012 3:57 AM
Subject: [ts-7000] Re: New to TS-7300

 
I know where to find the Cygwin tools for TS-7300. I got the tools in the development kit as well. I want to know the procedure of configuring the Cygwin. Like how will I use these files? Will I copy them in my Cygwin folder? If yes, then in which folder? if no, then what should I do?

Regards
Muhammad Asim Zahid

P.S. I am already using the VM for compiling but my boss asked me to use windows cross-compiler

--- In , harry olar <> wrote:
>
> Here is where you can find the Cygwin tools for TS7300
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/cross-toolchains/
>
> Use the crosstool with Cygwin in the name .
>
>
>
>
> ________________________________
> From: Rod Nussbaumer <>
> To:
> Sent: Wednesday, December 19, 2012 11:48 AM
> Subject: [ts-7000] Re: New to TS-7300
>
>
>  
> You should go to <http://crosstool-ng.org>. There, you will find a
> system for creation of cross toolchains with a wide variety of host and
> target architectures. While you're there, find out how to get on their
> mailing list, and go read the mailing list archives. There is some past
> discussion of cygwin as a toolchain host architecture.
> Be prepared for a bit of work, as it isn't easy to get everything
> configured just right. If you choose to roll your own (don't), then be
> prepared for a huge amount of work, and a resulting system that may not
> work correctly.
>
> --- rod.
>





__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU