|
Here is where you can find the Cygwin tools for TS7300
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/cross-toolchains/ Use the crosstool with Cygwin in the name . From: Rod Nussbaumer <> To: Sent: Wednesday, December 19, 2012 11:48 AM Subject: [ts-7000] Re: New to TS-7300 You should go to <http://crosstool-ng.org>. There, you will find a
system for creation of cross toolchains with a wide variety of host and target architectures. While you're there, find out how to get on their mailing list, and go read the mailing list archives. There is some past discussion of cygwin as a toolchain host architecture. Be prepared for a bit of work, as it isn't easy to get everything configured just right. If you choose to roll your own (don't), then be prepared for a huge amount of work, and a resulting system that may not work correctly. --- rod. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |