I know where to find the Cygwin tools for TS-7300. I got the tools in the
development kit as well. I want to know the procedure of configuring the
Cygwin. Like how will I use these files? Will I copy them in my Cygwin folder?
If yes, then in which folder? if no, then what should I do?
Regards
Muhammad Asim Zahid
P.S. I am already using the VM for compiling but my boss asked me to use
windows cross-compiler
--- In harry olar <> wrote:
>
> Here is where you can find the Cygwin tools for TS7300
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/cross-toolchains/
>
> Use the crosstool with Cygwin in the name .
>
>
>
>
> ________________________________
> From: Rod Nussbaumer <>
> To:
> Sent: Wednesday, December 19, 2012 11:48 AM
> Subject: [ts-7000] Re: New to TS-7300
>
>
> Â
> You should go to <http://crosstool-ng.org>. There, you will find a
> system for creation of cross toolchains with a wide variety of host and
> target architectures. While you're there, find out how to get on their
> mailing list, and go read the mailing list archives. There is some past
> discussion of cygwin as a toolchain host architecture.
> Be prepared for a bit of work, as it isn't easy to get everything
> configured just right. If you choose to roll your own (don't), then be
> prepared for a huge amount of work, and a resulting system that may not
> work correctly.
>
> --- rod.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|