|
thank you From: Jon Brinkmann <>
To: Sent: Wednesday, June 27, 2012 10:32 PM Subject: Re: [ts-7000] low serial baudrate for ts-7260 Either
- you're not using the /etc/inittab entries exactly as given, so please check again, especially make sure that the "lgn1" entry is commented out. See http://www.linuxcertif.com/man/8/getty/304568/ for the getty man page. - you've multiple getty's running. Try rebooting. Jon On Wed, Jun 27, 2012 at 11:25:50AM -0700, Damian Miralles wrote: > Hello: > I did the changes on the /etc/inittab/ > # > # Start console logins on both COM Ports > # > lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0 > # Disable COM2 logins, but set baud rate > com2:12345:once:/sbin/getty -L -n -t 1 1200 ttyAM1 > #lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1 > > I manage to set the port to the 1200 baud rate as desired and I am able of sending and receiving data to the desired speed, however I do notice that i keep having an input on the com2 port as login, let's say that if i have connected COM2 to my pc serial port and com1 as the console, i still get the message > "ts7200 login" on the serial port window connected to COM2. in adittion I can login since the COM2 PORT without any problem > When editing the /etc/inittab/ I believe that the dual login console will be disbale, any idea why i am getting this result > Thanks > Damian __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |