|
Hello: I did the changes on the /etc/inittab/ # # Start console logins on both COM Ports # lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0 # Disable COM2 logins, but set baud rate com2:12345:once:/sbin/getty -L -n -t 1 1200 ttyAM1 #lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1 I manage to set the port to the 1200 baud rate as desired and I am able of sending and receiving data to the desired speed, however I do notice that i keep having an input on the com2 port as login, let's say that if i have connected COM2 to my pc serial port and com1 as the console, i still get the message "ts7200 login" on the serial port window connected to COM2. in adittion I can login since the COM2
PORT without any problem When editing the /etc/inittab/ I believe that the dual login console will be disbale, any idea why i am getting this result Thanks Damian From: Jon Brinkmann <> To: Sent: Monday, June 25, 2012 9:47 PM Subject: Re: [ts-7000] low serial baudrate for ts-7260 Forget setserial, use getty. For com2, in /etc/inittab use:
# # Start console logins on both COM Ports # lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0 # Disable COM2 logins, but set baud rate com2:12345:once:/sbin/getty -L -n -t 1 1200 ttyAM1 #lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1 Jon On Mon, Jun 25, 2012 at 11:31:33PM +0000, Damian wrote: > HELLO: > I am using a TS-7260 and would like to use one of the serial ports available but to a lower speed. I want to set the serial port speed to 1200 kbps, Is there a way to manage to do that? > I have tried with setserial but is not possible > Thank you all > Damian > > > > ------------------------------------ > > Yahoo! Groups Links > > > > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |