Forget setserial, use getty. For com2, in /etc/inittab use:
#
# Start console logins on both COM Ports
#
lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
# Disable COM2 logins, but set baud rate
com2:12345:once:/sbin/getty -L -n -t 1 1200 ttyAM1
#lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1
Jon
On Mon, Jun 25, 2012 at 11:31:33PM +0000, Damian wrote:
> HELLO:
> I am using a TS-7260 and would like to use one of the serial ports available
> but to a lower speed. I want to set the serial port speed to 1200 kbps, Is
> there a way to manage to do that?
> I have tried with setserial but is not possible
> Thank you all
> Damian
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|