I don't suppose anyone else has any ideas?
Thanks,
Joe
--- In Don Tucker <> wrote:
>
> Isn't that set in your kernel command? My command is:|
>
> root=/dev/ram0 rw init=/linuxrc lpj=498688 console=ttyAM0,115200|
>
> Wouldn't you change that to console=ttyAM1,115200 for going out COM2?
>
> Also, I seem to recall a config file or init script where you set which
> COM port you want to be standard out, but I can't remember which one it is.
>
> Don
> On 3/12/2012 8:17 AM, vaijpc wrote:
> >
> > Howdy,
> >
> > I've set my ts7260 to boot from sd by following the instructions here:
> > http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
> >
> > Because I would like to use the full com1 interface I am attempting to
> > get everything that was normally pushed out via com1 onto com2.
> >
> > TS-SDBOOT doesn't seem to honor the jumper settings though? Whether I
> > have JP2, JP2+4 or neither, everything continues to be spat out of com1!
> >
> > Any suggestions?
> >
> > Thanks for your help,
> >
> > Joe
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|