[ts-7000] Ethernet drivers in 2.6.29-ts kernel

ts-7000

[ts-7000] Ethernet drivers in 2.6.29-ts kernel

To:
Subject:	[ts-7000] Ethernet drivers in 2.6.29-ts kernel
From:	Don Tucker <>
Date:	Mon, 19 Mar 2012 17:32:49 -0500

Sorry if people received multiple copies of this question.  My first
post was accidentally put into a reply chain for another post.

Can someone tell me how I would load the drivers for TS-ETH2 boards when
using
the 2.6.29-ts kernel? When using the 2.6.21-ts kernel I could put

-o ts-eth2-1 ax88796b mem=0x200 irq=33
-o ts-eth2-2 ax88796b mem=0x240 irq=40

into /etc/modules (I'm running a TS-7260 base board), but the 2.6.29-ts
kernel
doesn't have the ax88796b driver. It has ax88796 and ax88796_ts_eth100, but
modinfo doesn't show either of those to accept parameters.

Don

smime.p7s
Description: S/MIME Cryptographic Signature

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Ethernet drivers in 2.6.29-ts kernel, Don Tucker <=

Previous by Date:	Re: [ts-7000] Problem with DIO header of TS 7800, Jim Jackson
Next by Date:	[ts-7000] Re: ts7260 ts-sdboot jumper settings, vaijpc
Previous by Thread:	[ts-7000] Problem with DIO header of TS 7800, charliewxj
Next by Thread:	[ts-7000] TS-ETH2 or TS-GSM1 with 2.6.29-ts kernel, Don Tucker
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU