[ts-7000] ts7260 ts-sdboot jumper settings

["vaijpc" <>]

Howdy,

I've set my ts7260 to boot from sd by following the instructions here: 
http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php

Because I would like to use the full com1 interface I am attempting to get 
everything that was normally pushed out via com1 onto com2.

TS-SDBOOT doesn't seem to honor the jumper settings though? Whether I have JP2, 
JP2+4 or neither, everything continues to be spat out of com1!

Any suggestions?

Thanks for your help,

Joe



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/