--- In Jim Jackson <> wrote:
> This is very odd. It _looks_ as if you have some sort of localecho set on
> minicom, and a fault in the Terminal 7250 serial connection.
Found it!
Walter suggested I make sure hardware flow control is off -- but it was turned
on.
I'm embarrassed to say that I had thought of this before my last post, then
promptly forgot to check after squeezing myself into the 5'x5' network closet
where the Linux boxes are located.
After I configured minicom to not use HW flow control, everything works fine --
I can login on the serial port, and even get the Redboot prompt.
Now all I need to is use fdconfig to extend the Control-C time and set the
correct IP addresses.
Thanks for the help.
--- Mike
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|