Thanks Russell,
I'm not sure that's what's happening though because when I found out
that I'm not connected anymore, /dev/ttyUSB0 is gone.
Also, what did you mean exactly by "switch between interfaces"?
Rgds,
On 28/02/11 16:57, Russell N. Nelson - rnnelson wrote:
> It's possible that the telco disconnects after a period of time, or a period
> of inactivity. I've found that I have to run a program which checks for
> connectivity (ping), and then re-connects. My program also switches between
> interfaces, looking for one which is up.
> ________________________________________
> From: on behalf of Simon
> Leung
> Sent: Monday, February 28, 2011 4:18 AM
> To:
> Subject: [ts-7000] 3G internet stability problem
>
> Hi all,
>
> I'm using a ts7800 + USB 3G broadband stick for a remote monitoring
> system. The USB modem I'm using is Huawei E122. wvdial works fine for
> providing connectivity. But after a while (varies from 1 to 5 hours),
> the link will be down, wvdial will exit and kernel will think that the
> device is disconnected:
>
> option1 ttyUSB0: GSM modem (1-port) converter now disconnected from
> ttyUSB0
> done!
>
> Anybody has suggestions as how to improve this situation? I don't expect
> mobile broadband link to stay up as long as a wired connection but it
> would be nice if it lasted a bit longer!
>
> Thanks and regards,
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|