Thanks, Clark. Yes, it is a 2GB SD card, and yes, I do use the bs=2048
option. I can get the 512mbsd-7400-linux2629-lenny-eabi.dd
<ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2>
image to boot, but not after rebuilding the kernel. Do you have a
default config file for the TS-7260 with the 2.6.29-ts kernel that you
can point me toward?
Don
On 2/10/2011 3:59 PM, Clark Dunson wrote:
>
> Yes Don,
>
> Are you on a 2GB SD card?
> Be sure you include the bs=2048 option to dd every single time you
> write to a 2GB SD card.
> I have replaced the kernel many times without trouble using dd in this
> manner.
> That rolling reboot you describe happens here when I don't do it right.
>
> On Feb 10, 2011, at 1:48 PM, Rekcut_Nod wrote:
>
>> Has anyone managed to get this combination running? I tried to get
>> this image
>>
>> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2
>>
>> to boot with a rebuilt kernel using this source
>>
>> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/tskernel-2.6.29-ts-src.tar.gz
>>
>> <ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-li%21%0A%20nux/sources/tskernel-2.6.29-ts-src.tar.gz>
>>
>> and a config file that I used with a 2.6.21-ts kernel, but the the
>> resulting SD card just keeps rebooting after the second '.' following
>> the "TS-BOOT" message.
>>
>> I am only considering doing this because the 2.6.21-ts driver for the
>> TS-ETH2 card (ax88796b) seems to have issues. :(
>>
>> Don
>>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|