Re: [ts-7000] 2.6.29-ts on TS-7260

[Clark Dunson <>]

Yes Don,

Are you on a 2GB SD card?

Be sure you include the bs=2048 option to dd every single time you write to a 2GB SD card.  

I have replaced the kernel many times without trouble using dd in this manner.

That rolling reboot you describe happens here when I don't do it right.

On Feb 10, 2011, at 1:48 PM, Rekcut_Nod wrote:

 

Has anyone managed to get this combination running? I tried to get this image

ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2

to boot with a rebuilt kernel using this source

ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/tskernel-2.6.29-ts-src.tar.gz

and a config file that I used with a 2.6.21-ts kernel, but the the resulting SD card just keeps rebooting after the second '.' following the "TS-BOOT" message.

I am only considering doing this because the 2.6.21-ts driver for the TS-ETH2 card (ax88796b) seems to have issues. :(

Don

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___