--- In "Russell N. Nelson - rnnelson" <>
wrote:
>
> Yes, I was able to do this. I'm not sure why you're having trouble and I'm
> away from my hardware to test it out.
> -russ
> ________________________________________
> From: on behalf of Greg
>
> Sent: Monday, February 07, 2011 3:12 PM
> To:
> Subject: [ts-7000] Re: Running tsbootrom-update from telnet.
>
> --- In "Greg" <gthorne@> wrote:
> >
> > Ok, made sure I downloaded the executable from the ts-7400 directory on the
> > FTP server. Same result. If I run it from within the initrd, how can I
> > tell if it ran successfully?
> >
> >
> > --- In Neil Stone <neil@> wrote:
> > >
> > > -----BEGIN PGP SIGNED MESSAGE-----
> > > Hash: SHA1
> > >
> > > On 04/02/2011 15:18, Greg wrote:
> > > >
> > > >
> > > > Hi, I have the TS-7400, but I don't have the TS-9441. So, I was able to
> > > > get to the SBC by plugging in a crossover cable and telnetting to
> > > > 192.168.0.50. I got a prompt, and am now working through these steps:
> > > > http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
> > > >
> > > > On step 5, I was able to get the tsbootrom-update onto the SBC via wget
> > > > (hosted the file on the connected computer), but I can't seem to run the
> > > > executable. Here's what I've tried:
> > > >
> > > > $ wget -q http://192.168.0.100/tsbootrom-update
> > > > $ ls -la
> > > > -rw-r--r-- 1 0 0 34158 Jan 1 01:33 tsbootrom-update
> > > > drwxr-xr-x 10 0 0 1024 Jan 1 01:03 ..
> > > > drwxr-xr-x 2 0 0 1024 Jan 1 01:33 .
> > > > $ ./tsbootrom-update
> > > > /bin/sh: ./tsbootrom-update: Permission denied
> > > > $ chmod 777 tsbootrom-update
> > > > $ ./tsbootrom-update
> > > > /bin/sh: ./tsbootrom-update: not found
> > > > $
> > > >
> > > > I'm trying to run it out of the /root directory, but I'm not sure if
> > > > that is right for a busybox installation. How should I install the
> > > > executable?
> > > >
> > >
> > > check that you have the right binary for your platform and that the
> > > required libraries are all in the right places.. I had a similar issue
> > > with another tool I DL from TS ftp server (I forget which it was now)
> > > and it turned out I was doing things wrongly in that dept. I had to run
> > > the binary from within the initrd not a fully booted system (though I'm
> > > not sure if you have done this)
> > >
> > > HTH..
> > >
> > > Neil
> > > -----BEGIN PGP SIGNATURE-----
> > > Version: GnuPG v1.4.10 (MingW32)
> > > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> > >
> > > iEYEARECAAYFAk1MMN4ACgkQz3Av8JKgzxSAZACeItLX7PHB4Awm39vze2UHAHLT
> > > MW4An0NbO9ZEEWQ3Lgn3hKB48GstQUpJ
> > > =ZIJZ
> > > -----END PGP SIGNATURE-----
> > >
> >
>
> Is anyone able to do this? I just need to know how to get through Step 5.
> Has anyone done this before on a TS-7400?
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
I just wanted to post for anyone else that is dealing with this. I was able to
get it working. For some reason, I had to eject the SD card. Then I did a
'kill -9 14' to kill the current sh. When I telnetted back in, I logged in as
root, and it worked.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|