[ts-7000] booting new 2.6 kernel from SD (TS-7260)

["daliborfarny" <>]

Hello guys,

I tried to find an answer for my questions here, but unsuccessfull.

I have working 4GB SDHC card with 2.6.29-ts kernel, the SBC boots, everything 
OK.

But now, I want to compile my own kernel with support of some new drivers 
(modules I2C, dallas's one wire...). I compiled new Image, dd'd it to first 
partition of SDHC card, but when it boots, the "uname -r" says still 
"2.6.29-ts" instead of "2.6.34-m".. I am not able to make it work..

I tried several ways (from embeddedarm site), but no one worked..

My card has 4 partitions
- sdd1 4MB (non-fs, should be kernel image)
- sdd2 2.5MB (non-fs, I don't know)
- sdd3 1.5MB (ext2, I don't know)
- sdd4 (the rest of the card, root & data)

Any help would be appreciated,

thanks,

Dalibor Farny



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/