So I tried dd'd it to 2nd partition and it seems to boot new kernel, but
it keeps rebooting in the middle of boot.. I saw that problem somewhere
here, it is something with watchdog..
Thank You!
Dalibor
Dne 7.2.2011 17:10, Don Tucker napsal(a):
> I think the kernel is actually on the 2nd partition. 3rd partition is
> the initrd, and the 4th partition is the root file system.
>
> Also, I ran into some problems when changing my kernel name from the
> original name. I'm not sure why, but I had to keep the name the same
> (e.g. 2.6.29-ts) in order to get the kernel and user space to work together.
>
> Don
> On 2/7/2011 8:59 AM, daliborfarny wrote:
>> Hello guys,
>>
>> I tried to find an answer for my questions here, but unsuccessfull.
>>
>> I have working 4GB SDHC card with 2.6.29-ts kernel, the SBC boots,
>> everything OK.
>>
>> But now, I want to compile my own kernel with support of some new
>> drivers (modules I2C, dallas's one wire...). I compiled new Image,
>> dd'd it to first partition of SDHC card, but when it boots, the "uname
>> -r" says still "2.6.29-ts" instead of "2.6.34-m".. I am not able to
>> make it work..
>>
>> I tried several ways (from embeddedarm site), but no one worked..
>>
>> My card has 4 partitions
>> - sdd1 4MB (non-fs, should be kernel image)
>> - sdd2 2.5MB (non-fs, I don't know)
>> - sdd3 1.5MB (ext2, I don't know)
>> - sdd4 (the rest of the card, root& data)
>>
>> Any help would be appreciated,
>>
>> thanks,
>>
>> Dalibor Farny
>>
>>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|