ts-7000
[Top] [All Lists]

[ts-7000] TS-7260 USB with 2.6 kernel

To:
Subject: [ts-7000] TS-7260 USB with 2.6 kernel
From: "Rekcut_Nod" <>
Date: Wed, 02 Feb 2011 17:50:10 -0000
I am trying to get the USB ports working on the TS-7260 running a 2.6.21-ts 
kernel.  Some reading on this list indicates that perhaps the ports are not 
powered on.  This post

http://tech.groups.yahoo.com/group/ts-7000/message/18106

indicates a way to turn them on, but my response from peek8 0x12000000 was 0x1, 
which is different from that of other people, so I'm wary of trying the poke8.  
I thought I would try ts7xxx.subr's usb_init, but it calls peekpoke, which I 
don't have.  I downloaded and built

ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/peekpoke.tar.gz

but it does not make peekpoke, but only peek8, poke8, etc.  Can someone tell me 
where to find peekpoke, or redirect me as to how to enable the USB ports in 
case I'm barking up the wrong tree?  I have the following modules loaded:

usbhid
hid
usb_storage
scsi_mod
usb_core
ohci_hcd

And the following entries in dmesg:

ts7000:~# dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EP93xx OHCI
usb usb1: Manufacturer: Linux 2.6.21-ts ohci_hcd
usb usb1: SerialNumber: ep93xx
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: no power switching (usb 1.0)
drivers/usb/core/inode.c: creating file '001'
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver

Thank you,
Don



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU