--- In Don Tucker <> wrote:
>
> Regarding peekpoke, I found the source at
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/samples/peekpoke.c,
> built peekpoke, moved it to /usr/sbin/ and then, ran usb_init from the
> ts7xxx.subr shell (export model=2). However, there was still no response
> to inserting or removing my usb memory stick on the usb port.
>
> Don
Please define "no response".
Say what you expect, why you expect it and what you are seeing that leads you
to conclude it's not happening : ie post some output, not chat.
I have no problem getting USB wifi to work on TS7250 , I don't expect the USB
to be any different on 7260.
regards
>
> On 2/2/2011 11:50 AM, Rekcut_Nod wrote:
> >
> > I am trying to get the USB ports working on the TS-7260 running a
> > 2.6.21-ts kernel. Some reading on this list indicates that perhaps the
> > ports are not powered on. This post
> >
> > http://tech.groups.yahoo.com/group/ts-7000/message/18106
> >
> > indicates a way to turn them on, but my response from peek8 0x12000000
> > was 0x1, which is different from that of other people, so I'm wary of
> > trying the poke8. I thought I would try ts7xxx.subr's usb_init, but it
> > calls peekpoke, which I don't have. I downloaded and built
> >
> > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/sources/peekpoke.tar.gz
> >
> > but it does not make peekpoke, but only peek8, poke8, etc. Can someone
> > tell me where to find peekpoke, or redirect me as to how to enable the
> > USB ports in case I'm barking up the wrong tree? I have the following
> > modules loaded:
> >
> > usbhid
> > hid
> > usb_storage
> > scsi_mod
> > usb_core
> > ohci_hcd
> >
> > And the following entries in dmesg:
> >
> > ts7000:~# dmesg | grep usb
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > drivers/usb/core/inode.c: creating file 'devices'
> > drivers/usb/core/inode.c: creating file '001'
> > usb usb1: default language 0x0409
> > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb1: Product: EP93xx OHCI
> > usb usb1: Manufacturer: Linux 2.6.21-ts ohci_hcd
> > usb usb1: SerialNumber: ep93xx
> > usb usb1: uevent
> > usb usb1: usb_probe_device
> > usb usb1: configuration #1 chosen from 1 choice
> > usb usb1: adding 1-0:1.0 (config #1, interface 0)
> > usb 1-0:1.0: uevent
> > hub 1-0:1.0: usb_probe_interface
> > hub 1-0:1.0: usb_probe_interface - got id
> > hub 1-0:1.0: no power switching (usb 1.0)
> > drivers/usb/core/inode.c: creating file '001'
> > usbcore: registered new interface driver usb-storage
> > usbcore: registered new interface driver usbhid
> > drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> >
> > Thank you,
> > Don
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|