Kris
The new 2G-mSD-7800-10-10-10.dd works with an ax88796b without having to
first do ...
The PC-104 connector can be multiplexed between different
functionalities including ISA bus and GPIO. The power-up default is GPIO
mode, with all I/Os in a neutral state. To enable the PC-104 bus (ISA)
signals, it is necessary to write the following values to the registers
specified:
0x55555555 to address 0xE8000030
0x55555555 to address 0xE8000034
0x55555 to address 0xE8000038
0x55555 to address 0xE800003C
I can't find where this is happening with this build. Has the power-up
default changed?
Ian T.
This e-mail, including any attachments and response string, may contain
proprietary information which is confidential and may be legally privileged. It
is for the intended recipient only. If you are not the intended recipient or
transmission error has misdirected this e-mail, please notify the author by
return e-mail and delete this message and any attachment immediately. If you
are not the intended recipient you must not use, disclose, distribute, forward,
copy, print or rely on this e-mail in any way except as permitted by the author.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|