For the 2.6.34 kernel the TS-7800 has an official machine ID. You need to copy
the MBR of the SD card image (only need the first 440 bytes) to your image so
the machine ID gets correctly reported to the kernel.
-Kris Bahnsen
Technologic Systems
--- In "Reti Istvan" <> wrote:
>
> Hi,
> I am trying to upgrade the kernel on our production card with a custom
> partition map without luck. Tested the compiled kernel on the standard image
> (2G-mSD-7800-10-10-10.dd.gz) downloaded from the ftp and it works but when I
> try to use it on the production image or an older card image is not booting,
> after the Uncompressing message it stops.
> Replaced all the modules but still nothing. Any suggestions?
> Thank you,
> Istvan
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|