Thanks again, Joel,
No, I cannot ping or telnet 192.168.0.50/24. Putty was defaulting to port 22 or
23. But changing the port to 24 did not help. And the lack of response to pings
does not bode well.
I shall call tech support.
Thanks
Bob Furber
--- In Joel Morgan <> wrote:
>
> On Fri, 2011-01-21 at 03:04 +0000, burnsmicro wrote:
> >
> >
> >
> > Thanks for reply.
> >
> > http://www.embeddedarm.com/about/resource.php?item=499 was not all
> > that helpful. But, on a closer read it did identify the TS-9448 as an
> > accessory for serial access to the board. Despite this, I was unable
> > to connect.
> >
> > Neither could I connect through telnet. So, I will have to phone in
> > for support tomorrow.
> >
> > Yes, it looks like a "nice little box". But getting started
> > documentation is lacking.
>
> What's new:)
> Dont forget the manual for the SBC:
> http://www.embeddedarm.com/about/resource.php?item=437
>
> Strange that it doesnt respond to telnet on 192.168.0.50/24
> Can you ping it?
>
>
>
> --
> Joel R. Morgan
> Morgan Millwright Services, Inc.
> Linux User #504110 http://counter.li.org/
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|