On Fri, 21 Jan 2011, burnsmicro wrote:
> No, I cannot ping or telnet 192.168.0.50/24. Putty was defaulting to port
> 22 or 23. But changing the port to 24 did not help. And the lack of
> response to pings does not bode well.
Oh dear. 192.168.0.50/24 is NOT a reference to the tcp port to use!
It means that the address is 192.168.0.50 and it on the network
192.168.0.50 with netmask 255.255.255.0, i.e. a 24 bit netmask!
I assume that you tried to connect to this from another device on the local
network with an address in the network 192.168.0.0 ? What is the IP address
of the PC on which you ran putty?
> I shall call tech support.
>
> Thanks
>
> Bob Furber
>
> --- In Joel Morgan <> wrote:
> >
> > On Fri, 2011-01-21 at 03:04 +0000, burnsmicro wrote:
> > >
> > >
> > >
> > > Thanks for reply.
> > >
> > > http://www.embeddedarm.com/about/resource.php?item=499 was not all
> > > that helpful. But, on a closer read it did identify the TS-9448 as an
> > > accessory for serial access to the board. Despite this, I was unable
> > > to connect.
> > >
> > > Neither could I connect through telnet. So, I will have to phone in
> > > for support tomorrow.
> > >
> > > Yes, it looks like a "nice little box". But getting started
> > > documentation is lacking.
> >
> > What's new:)
> > Dont forget the manual for the SBC:
> > http://www.embeddedarm.com/about/resource.php?item=437
> >
> > Strange that it doesnt respond to telnet on 192.168.0.50/24
> > Can you ping it?
> >
> >
> >
> > --
> > Joel R. Morgan
> > Morgan Millwright Services, Inc.
> > Linux User #504110 http://counter.li.org/
> >
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|