On Fri, 2011-01-21 at 03:04 +0000, burnsmicro wrote:
>
>
>
> Thanks for reply.
>
> http://www.embeddedarm.com/about/resource.php?item=499 was not all
> that helpful. But, on a closer read it did identify the TS-9448 as an
> accessory for serial access to the board. Despite this, I was unable
> to connect.
>
> Neither could I connect through telnet. So, I will have to phone in
> for support tomorrow.
>
> Yes, it looks like a "nice little box". But getting started
> documentation is lacking.
What's new:)
Dont forget the manual for the SBC:
http://www.embeddedarm.com/about/resource.php?item=437
Strange that it doesnt respond to telnet on 192.168.0.50/24
Can you ping it?
--
Joel R. Morgan
Morgan Millwright Services, Inc.
Linux User #504110 http://counter.li.org/
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|