Thanks, Walter.
My problem is more rudimentary.
Brett advised me to follow the TS-7500 software guide.
On my hyperterminal i typed this against '#' prompt: gcc -Wall -mcpu=arm9
tstest.c -o tstest
It told me this: /bin/hs: gcc: not found
what steps I should take before writing a program?
thanks,
--- In walter marvin <> wrote:
>
> the ts7500ctl program does this function the source code for this program is
> available on the technologic web site. Basically there is a small assembler
> routine that is available in sbus.c. It is then simply a matter of using mmap
> to map the hardware into the user space and tweaking the correct registers in
> the hardware.
>
> --- On Wed, 1/19/11, hydra_punch <> wrote:
>
> From: hydra_punch <>
> Subject: [ts-7000] Using TS-7500
> To:
> Date: Wednesday, January 19, 2011, 6:15 AM
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> Hello,
>
> I am new to Linux.
>
> I bought TS7500 with TS-752.
>
> Using hyperterminal I could issue commands on "#" prompt and control/read I/O
> and temperature.
>
> Now I wish to write a simple program in C to control relays provided on
> ts-752.
>
> Can someone give a step-by-step procedure to achieve this?
>
> Thanks.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|