Re: [ts-7000] Re: Using TS-7500

[Jonatan Olofsson <>]

Unconfigured, the TS-7500 starts with just a tiny busybox linux installation running on the onboard flash memory, and I'm not sure that gcc is included there. There are jumpers on the ts-752 to switch to a mode where the linuxrc-sdcard rc-file is loaded at boot time, causing the board to try to boot from the microSD-card instead. On the microSD-card, you should have a linux installation, preferrably from the image provided by TS at ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-images/2gbsd-eclipse-latest.dd.bz2

>From there, you can compile your programs with gcc on-board without the need of a cross-compiler on your computer.

//Jonatan

On Fri, Jan 21, 2011 at 09:48, hydra_punch <> wrote:

 

Thanks, Walter.
My problem is more rudimentary.
Brett advised me to follow the TS-7500 software guide.
On my hyperterminal i typed this against '#' prompt: gcc -Wall -mcpu=arm9 tstest.c -o tstest
It told me this: /bin/hs: gcc: not found
what steps I should take before writing a program?
thanks,

--- In ts-7000%40yahoogroups.com, walter marvin <> wrote:
>
> the ts7500ctl program does this function the source code for this program is available on the technologic web site. Basically there is a small assembler routine that is available in sbus.c. It is then simply a matter of using mmap to map the hardware into the user space and tweaking the correct registers in the hardware.
>

> --- On Wed, 1/19/11, hydra_punch <> wrote:
>
> From: hydra_punch <>

> Subject: [ts-7000] Using TS-7500
> To: ts-7000%40yahoogroups.com
> Date: Wednesday, January 19, 2011, 6:15 AM
>
>
>
>
>
>
>

>  

>
>
>
>
>
>
>
>
>
> Hello,
>
> I am new to Linux.
>
> I bought TS7500 with TS-752.
>
> Using hyperterminal I could issue commands on "#" prompt and control/read I/O and temperature.
>
> Now I wish to write a simple program in C to control relays provided on ts-752.
>
> Can someone give a step-by-step procedure to achieve this?
>
> Thanks.
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___