-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 01/21/11 03:59, Jonatan Olofsson wrote:
> Unconfigured, the TS-7500 starts with just a tiny busybox linux installation
> running on the onboard flash memory, and I'm not sure that gcc is included
> there. There are jumpers on the ts-752 to switch to a mode where the
> linuxrc-sdcard rc-file is loaded at boot time, causing the board to try to
> boot from the microSD-card instead. On the microSD-card, you should have a
> linux installation, preferrably from the image provided by TS at
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-images/2gbsd-eclipse-latest.dd.bz2
> From there, you can compile your programs with gcc on-board without the need
> of a cross-compiler on your computer.
It should be added that if you're doing any large compiles you're likely
to run the board out of RAM :) A cross-compiler is still something
worth learning and setting up, even a few thousand lines can take a fair
bit of time to compile on the board.
- --
Jason Stahls
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJNObhwAAoJEBWmhVAMrS/grCkH/1aCFIn3/v5LAPPsJva7WqKW
WaIGT2Tcsiloi/0EKPlOiM2/NsYjV+1yTzxu7dBqrBJOH1nzJk9xbxXS7TLC+YKx
DwNQSdpTvwdJYj/xetRRj8qzRW1BgoIYzMQ0C+/974VNUEFk4vD8xgHhz2KgeaFV
xzggMAOt1IHIcvzYJ6a9cGEMCiTMx4sTh05/JZlQmlmLi82p/24LaRuPTePo/sT5
jQ6VF/OxROmEKMrewqTFfqqKks8WEwCR7Z8HHVwwS4ld+6H7b7Nxy42wOK3JIE4d
HBdMtHepgUYO9TZJVJeFjOn6ekByM5nVNMouc2/rGYieFoUTa2zhJbQpv/TJzok=
=q+PP
-----END PGP SIGNATURE-----
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|