Yes, that SD card image is compatible, however it is provided on our FTP use in
the hope that it will be useful, it is not supported by us and all of the
software features have not been tested.
-Kris Bahnsen
Technologic Systems
--- In "Rekcut_Nod" <> wrote:
>
> Will this procedure
>
> http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
>
> work when using this SD image
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2
>
> instead of the one referenced in the procedure, i.e.
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/sdimage.dd.bz2
>
> ?
>
> I'd prefer not to have to configure my board to never boot from NAND again,
> but I haven't had any success getting a 2.6 kernel to boot from the default
> 2.4 kernel, so I'm willing to risk it.
>
> Don
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|