Will this procedure
http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
work when using this SD image
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2
instead of the one referenced in the procedure, i.e.
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/sdimage.dd.bz2
?
I'd prefer not to have to configure my board to never boot from NAND again, but
I haven't had any success getting a 2.6 kernel to boot from the default 2.4
kernel, so I'm willing to risk it.
Don
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|