RE: [ts-7000] Re: TS-SDBOOT on TS7260 with 2.6 SD image?

["Russell N. Nelson - rnnelson" <>]

Urgh. That image is not set up to check the root filesystem before mounting it. So if you lose power and the filesystem gets corrupted, when you reboot, you will have lost files, locked filenames, and various other damage easily fixed with a fsck. Does anybody have a 2.6 image with this problem fixed?

---

From: on behalf of Clark Dunson
Sent: Thursday, January 13, 2011 3:55 PM
To:
Subject: Re: [ts-7000] Re: TS-SDBOOT on TS7260 with 2.6 SD image?

Hey Don;

I have had lots of luck with that lenny image.  I have simply expanded it to 2GB, made sure it boots,

and the I replace the partitions piecemeal to make my cards.

(don't forget bs=2048 options to the dd command.  Must be used every time you write on 2GB including

when you insert kernel into partition2).

Good luck

On Jan 13, 2011, at 1:22 PM, wrote:

 

But, doesn't TS-SDBOOT expect to find the kernel on partition 1, and the
initrd on partition 2, of the SD card? I think the partitions are
different for the 2.6 SD image (maybe partitions 2 and 3, respectively).
Is there a way to make sure that things are looked for in the right place
on the SD card?

Don

> Yes, that SD card image is compatible, however it is provided on our FTP
> use in the hope that it will be useful, it is not supported by us and all
> of the software features have not been tested.
>
> -Kris Bahnsen
> Technologic Systems
>
>
> --- In ts-7000%40yahoogroups.com, "Rekcut_Nod" <> wrote:
>>
>> Will this procedure
>>
>> http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
>>
>> work when using this SD image
>>
>> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-images/512mbsd-7400-linux26-lenny-eabi.dd.bz2
>>
>> instead of the one referenced in the procedure, i.e.
>>
>> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-images/sdimage.dd.bz2
>>
>> ?
>>
>> I'd prefer not to have to configure my board to never boot from NAND
>> again, but I haven't had any success getting a 2.6 kernel to boot from
>> the default 2.4 kernel, so I'm willing to risk it.
>>
>> Don
>>
>
>
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___