|
Hi all, I would like to use the serial blaster to boot my TS7250 board. Due to the absence of eeprom_write command, I have to compile ecos to get a customized redboot with enabled eeproom operation commands. I am following the instruction of README in the serial blaster. However, I can not use the "redboot_ts7250_eeprom.diff" to patch the original redboot code. The error information is as follows: HUNK #2
FAILED at 618.
1 out of 2 hunks FAILED -- saving rejects to file packages /hal/arm/arm9/ts7250/current/src/ts7250_misc.c.rej Furthermore, I can not use "make" to get a redboot.bin. Could anyone familiar with this process please tell me what I should do to patch the code and get the eeprom_write enabled redboot. The cross tool chain I used is arm-9tdmi-elf. Or, could anybody please give me a compiled redboot.bin with enabled eeprom_write, then I can boot my board directly.Thank you so much. Best Regards, Xiang Lu __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |