The main change I did with my redboot batch was to add the eeprom
writing commands. (If I remember correctly I also added some
initialization code that could not be done with the 2K serialblaster
bootloader). So if you port those to the newer redboot it might work.
You might also scan the newgroup archives to see if anyone else has
already done this.
Best of luck.
-Curtis.
On Wed, 2010-12-01 at 11:31 -0800, Xiang Lu wrote:
>
> Hi Petr,
>
>
> I tried your redboot.bin, which is the one in the serial blaster
> folder. I can not get a redboot prompt using that redboot. I guess
> that is because the configuration of my TS7250, which holds a 128M
> flash and a 64M RAM. I can get redboot prompt if I change the
> redboot.bin to the one provided from the ftp site of TS. But TS's
> redboot disables eeprom commands. Then, what should I do next?
> Manually patch the file "redboot_ts7250_eeprom.diff"? Thank you so
> much for your reply.
>
>
> Best Regards,
> Xiang Lu
>
>
> ______________________________________________________________________
> From: Petr Åtetiar <>
> To:
> Sent: Wed, December 1, 2010 12:51:58 PM
> Subject: Re: [ts-7000] Cannot patch redboot_ts7250_eeprom.diff
>
>
> Xiang Lu <> [2010-12-01 08:36:55]:
>
> > HUNK #2 FAILED at 618.
> > 1 out of 2 hunks FAILED -- saving rejects to file packages
> > /hal/arm/arm9/ts7250/current/src/ts7250_misc.c.rej
>
> Well, looks like that TS made some changes to the code :-) You will
> need to
> inspect the reject and rebase the patch.
>
> > Furthermore, I can not use "make" to get a redboot.bin. Could anyone
> familiar
> > with this process please tell me what I should do to patch the code
> and get the
> > eeprom_write enabled redboot. The cross tool chain I used is
> arm-9tdmi-elf. Or,
> > could anybody please give me a compiled redboot.bin with enabled
> eeprom_write,
> > then I can boot my board directly.Thank you so much.
>
> I think, that I've used this redboot[1] in the past to recover my
> board. But
> I'm not 100% sure :-)
>
> 1. http://ynezz.ibawizard.net/ts72xx/serial_blaster_1.0/redboot.bin
>
> -- ynezz
>
>
>
>
>
>
>
--
Curtis Monroe
Wk: 514-316-8487 x230
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|