--- In "richar_in" <> wrote:
>
> Hello
>
> I am using a TS-7800 board and I am not familiar with programming using
> Linux. I need to use the PC-104 bus to transfer data to another board .
>
> 1)I have the initialization values from the manual but where in the code
> should I set them .And using which commands ?
>
> 2)" peekpoke BITS ADDRESS VALUE " needs to be set .I gathered from one of the
> previous posts that to be set using the command line . Should I do it before
> I compile the code ? And on the telnet connection or the serial connection ?
>
> 3) How can I check back the if the values have been written correctly ? I
> will read that address to check but where can I see the value ?
>
> Thanks
>
> I am not familiar with programming using Linux.
What are you familiar with?
> but where in the code should I set them
Which "code" would that be?
> I am using a TS-7800 board
In what way are you "using" the board so far?
> I gathered from one of the previous posts that to be set using the
> command line . Should I do it before I compile the code ?
Do you know what a complier does?
No, come on. You do not have the first idea what you are doing , do you?
Embedded system programming is not for beginners. I would suggest that you have
about 2 yrs work in front of you.
I don't think you understand what hardware you have bought.
Certainly no one here is going to give you step by step instructions and walk
you through it. This is a developer list specific to TS hardware. If you don't
know what linux is or how to use a compiler , here is not the place to start.
Sorry to be blunt but you're just wasting peoples time with questions like
that, and probably your own time as well.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|