I switched to GTKterm and it now works as expected. I've also manually set the
speed to the maximum, but I don't know if that should impact anything.
Matt
--- In Jim Jackson <> wrote:
>
>
>
>
> On Sun, 15 Aug 2010, phreakuencies wrote:
>
> > Hi, I tried different options but I don't know... what would that
> > handshaking option would be?
>
> As I've no idea what terminal emulator you are using, look for things like
> No CTSRTS, No hardware flow control, No Modem control, Data Wires/Signals
> only, etc. Software flow control should be ok, but
> disable that as a test too.
>
> Read an rs232 primer to familiarise yourself with how a serial line works.
>
> >
> >
> >
> > --- In walter marvin <walter_b_marvin@> wrote:
> > >
> > > Make sure you have specified no handshaking on your terminal emulator,
> > > the kernel is picky about this
> > >
> > > --- On Fri, 8/13/10, phreakuencies <phreakuencies@> wrote:
> > >
> > >
> > > From: phreakuencies <phreakuencies@>
> > > Subject: [ts-7000] bootload and serial port
> > > To:
> > > Date: Friday, August 13, 2010, 2:55 PM
> > >
> > >
> > > Â
> > >
> > >
> > >
> > > Hi, I have a problem from some time ago and I wonder if anyone else
> > > suffers it as well. I have the 2.6.34 (with matt's patches) installed,
> > > and I start my ts7250 normally (with 2.4 kernel). I the use "bootload"
> > > to go into the 2.6 kernel (the root is a 2.6 archmobile installation I
> > > have on a 2GB thumbdrive). I use console=ttyAM0 and boot messages
> > > appear correctly over the serial line. The problem is that when it gets
> > > to the login prompt it stops receiving input (it still produces output
> > > though). I'm then forced to use ssh to log into the 2.6 installation.
> > >
> > > Any ideas on what could it be? Thanks
> > >
> > > Matt
> > >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|