Hi,
I tried different options but I don't know... what would that handshaking
option would be?
--- In walter marvin <> wrote:
>
> Make sure you have specified no handshaking on your terminal emulator, the
> kernel is picky about this
>
> --- On Fri, 8/13/10, phreakuencies <> wrote:
>
>
> From: phreakuencies <>
> Subject: [ts-7000] bootload and serial port
> To:
> Date: Friday, August 13, 2010, 2:55 PM
>
>
> Â
>
>
>
> Hi,
> I have a problem from some time ago and I wonder if anyone else suffers it as
> well.
> I have the 2.6.34 (with matt's patches) installed, and I start my ts7250
> normally (with 2.4 kernel). I the use "bootload" to go into the 2.6 kernel
> (the root is a 2.6 archmobile installation I have on a 2GB thumbdrive). I use
> console=ttyAM0 and boot messages appear correctly over the serial line.
> The problem is that when it gets to the login prompt it stops receiving input
> (it still produces output though). I'm then forced to use ssh to log into the
> 2.6 installation.
>
> Any ideas on what could it be? Thanks
>
> Matt
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|