It's Work... don't understand what' happens this time.. thanks for your
attention!
--- In Joe Mari Maja <> wrote:
>
> Hi Romain,
>
> I just checked my inittab today and I cannot find the ttts4 on Com3 - what I
> have is tty4 and its already commented.
>
> Try doing the stty -F again and check if you have an error?
>
> joe
>
>
> On Wed, Apr 21, 2010 at 3:13 AM, rodriguezromain62 <
> > wrote:
>
> >
> >
> > I see the file you said me, but what write in??
> > Its not ttyS4 but ttts4 on COM3.
> >
> >
> > --- In <ts-7000%40yahoogroups.com>, Joe Mari Maja
> > <jmaja.usc@> wrote:
> > >
> > > Hi romain,
> > >
> > > I am using the same board as you are. when you do the following:
> > >
> > > # stty -F /dev/ttyS4 baudrate
> > >
> > > you get no error on it?
> > >
> > > I haven't gone through up to that port nos. yet - but before I have
> > problems
> > > with com2 - all I did was to comment the ttyS1 in inittab file under
> > /etc.
> > > and everything works fine.
> > >
> > > joe
> > >
> > >
> > > On Tue, Apr 20, 2010 at 7:30 AM, rodriguezromain62 <
> > > rodriguezromain62@> wrote:
> > >
> > > >
> > > >
> > > > Hello everybody, I have a problem with serial port now =)
> > > >
> > > > I use stty -F /dev/ttts4 for configure my serial port with 9600 bauds
> > and
> > > > other parameters...
> > > > After, with a network analyzer, I send some char with the same config.
> > > >
> > > > On my TS7800, i use 'cat /dev/ttts4' for read. But I read anything :S
> > > > I dont understand why, Do you have an idea?
> > > >
> > > > Thanks
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|