I see the file you said me, but what write in??
Its not ttyS4 but ttts4 on COM3.
--- In Joe Mari Maja <> wrote:
>
> Hi romain,
>
> I am using the same board as you are. when you do the following:
>
> # stty -F /dev/ttyS4 baudrate
>
> you get no error on it?
>
> I haven't gone through up to that port nos. yet - but before I have problems
> with com2 - all I did was to comment the ttyS1 in inittab file under /etc.
> and everything works fine.
>
> joe
>
>
> On Tue, Apr 20, 2010 at 7:30 AM, rodriguezromain62 <
> > wrote:
>
> >
> >
> > Hello everybody, I have a problem with serial port now =)
> >
> > I use stty -F /dev/ttts4 for configure my serial port with 9600 bauds and
> > other parameters...
> > After, with a network analyzer, I send some char with the same config.
> >
> > On my TS7800, i use 'cat /dev/ttts4' for read. But I read anything :S
> > I dont understand why, Do you have an idea?
> >
> > Thanks
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|