[ts-7000] Re: RS-232 ts7800 /dev/ttts*

["rodriguezromain62" <>]

Update, when i send char for my TS to my analyzer, its work !!! but I can't 
read the data sent by the analyzer... what's happen? :'(

--- In  "rodriguezromain62" <> 
wrote:
>
> Hello everybody, I have a problem with serial port now =)
> 
> I use stty -F /dev/ttts4 for configure my serial port with 9600 bauds and 
> other parameters...
> After, with a network analyzer, I send some char with the same config.
> 
> On my TS7800, i use 'cat /dev/ttts4' for read. But I read anything :S 
> I dont understand why, Do you have an idea? 
> 
> 
> Thanks
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/