On Thu, 21 Jan 2010, fredolamainfroide wrote:
> Hi
> I have investigated to change console baudrate:
> The inittab file contains a line to settup ttyAM0 (console port)
> "----
> T0:23:respawn:/sbin/getty -L ttyAM0 115200 vt100
> "----
>
> I have questions concerning boot process:
> - Wich file is executed first inittab / linuxrc (it seems to be linuxrc) ?
> - My linuxrc file point to 'linuxrc-fastboot', so when the system boot, this
> file is executed. But when key in 'exit' command on prompt, a new system is
> launched (Booting Linux (using SD card ...)).
> Witch linuxrc file is used in this system ?
Why don't you change this to
T0:23:respawn:/sbin/getty -L ttyAM0 9600 vt100
and comment out the line in linuxrc - that way only oen place is changing
things. I'm assuming you want getty running on the line?
>
> I confused with different way to boot the system, if someone can help me to
> clarify my mind ?
>
> Fred
>
>
> --- In "PeterElliot" <> wrote:
>>
>> Hi Fred,
>>
>> Is your 7370 set up to fastboot? If not you would make the change to the
>> corresponding linuxrc file. Usually linuxrc is system linked to one of the
>> other linuxrc-XXXX files depending on the boot mode.
>>
>> Regards,
>>
>> PJE
>>
>> --- In "fredolamainfroide" <fredericfiquet@> wrote:
>>>
>>> Thanks Peter,
>>> I did the change in linuxrc-fastboot but ospeed is still 115200.
>>> But, if I write the command line (just after boot), change is correctly
>>> applied !
>>>
>>> How can I do to make the change permanent ?
>>>
>>> Fred
>>>
>>>
>>> --- In "PeterElliot" <egroups@> wrote:
>>>>
>>>> Hi Fred,
>>>>
>>>> If you look in the linuxrc-fastboot file (assuming it's the same as the
>>>> 7390) you will see the following near the top:
>>>>
>>>> stty -F $CONSOLE ospeed 115200 > /dev/null 2>&1
>>>>
>>>> I assume that if you change the 115200 to 9600 and reboot this should do
>>>> the trick (untested).
>>>>
>>>> Regards,
>>>>
>>>> PJE
>>>>
>>>> --- In "fredolamainfroide" <fredericfiquet@>
>>>> wrote:
>>>>>
>>>>> Hi all,
>>>>> I'd like to change console settings on my TS7370 (specially bitrate
>>>>> 115200-> 9600)
>>>>> How can I do that ?
>>>>>
>>>>> Thanks a lot
>>>>>
>>>>> Fred
>>>>>
>>>>
>>>
>>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|