Hi
I have investigated to change console baudrate:
The inittab file contains a line to settup ttyAM0 (console port)
"----
T0:23:respawn:/sbin/getty -L ttyAM0 115200 vt100
"----
I have questions concerning boot process:
- Wich file is executed first inittab / linuxrc (it seems to be linuxrc) ?
- My linuxrc file point to 'linuxrc-fastboot', so when the system boot, this
file is executed. But when key in 'exit' command on prompt, a new system is
launched (Booting Linux (using SD card ...)).
Witch linuxrc file is used in this system ?
I confused with different way to boot the system, if someone can help me to
clarify my mind ?
Fred
--- In "PeterElliot" <> wrote:
>
> Hi Fred,
>
> Is your 7370 set up to fastboot? If not you would make the change to the
> corresponding linuxrc file. Usually linuxrc is system linked to one of the
> other linuxrc-XXXX files depending on the boot mode.
>
> Regards,
>
> PJE
>
> --- In "fredolamainfroide" <fredericfiquet@> wrote:
> >
> > Thanks Peter,
> > I did the change in linuxrc-fastboot but ospeed is still 115200.
> > But, if I write the command line (just after boot), change is correctly
> > applied !
> >
> > How can I do to make the change permanent ?
> >
> > Fred
> >
> >
> > --- In "PeterElliot" <egroups@> wrote:
> > >
> > > Hi Fred,
> > >
> > > If you look in the linuxrc-fastboot file (assuming it's the same as the
> > > 7390) you will see the following near the top:
> > >
> > > stty -F $CONSOLE ospeed 115200 > /dev/null 2>&1
> > >
> > > I assume that if you change the 115200 to 9600 and reboot this should do
> > > the trick (untested).
> > >
> > > Regards,
> > >
> > > PJE
> > >
> > > --- In "fredolamainfroide" <fredericfiquet@>
> > > wrote:
> > > >
> > > > Hi all,
> > > > I'd like to change console settings on my TS7370 (specially bitrate
> > > > 115200-> 9600)
> > > > How can I do that ?
> > > >
> > > > Thanks a lot
> > > >
> > > > Fred
> > > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|