Hi Fred,
Is your 7370 set up to fastboot? If not you would make the change to the
corresponding linuxrc file. Usually linuxrc is system linked to one of the
other linuxrc-XXXX files depending on the boot mode.
Regards,
PJE
--- In "fredolamainfroide" <> wrote:
>
> Thanks Peter,
> I did the change in linuxrc-fastboot but ospeed is still 115200.
> But, if I write the command line (just after boot), change is correctly
> applied !
>
> How can I do to make the change permanent ?
>
> Fred
>
>
> --- In "PeterElliot" <egroups@> wrote:
> >
> > Hi Fred,
> >
> > If you look in the linuxrc-fastboot file (assuming it's the same as the
> > 7390) you will see the following near the top:
> >
> > stty -F $CONSOLE ospeed 115200 > /dev/null 2>&1
> >
> > I assume that if you change the 115200 to 9600 and reboot this should do
> > the trick (untested).
> >
> > Regards,
> >
> > PJE
> >
> > --- In "fredolamainfroide" <fredericfiquet@> wrote:
> > >
> > > Hi all,
> > > I'd like to change console settings on my TS7370 (specially bitrate
> > > 115200-> 9600)
> > > How can I do that ?
> > >
> > > Thanks a lot
> > >
> > > Fred
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|