[ts-7000] Re: Modifying console settings on TS7370

["fredolamainfroide" <>]

Thanks Peter,
I did the change in linuxrc-fastboot but ospeed is still 115200.
But, if I write the command line (just after boot), change is correctly applied 
!

How can I do to make the change permanent ?

Fred


--- In  "PeterElliot" <> wrote:
>
> Hi Fred,
> 
> If you look in the linuxrc-fastboot file (assuming it's the same as the 7390) 
> you will see the following near the top:
> 
> stty -F $CONSOLE ospeed 115200 > /dev/null 2>&1
> 
> I assume that if you change the 115200 to 9600 and reboot this should do the 
> trick (untested).
> 
> Regards,
> 
> PJE
> 
> --- In  "fredolamainfroide" <fredericfiquet@> wrote:
> >
> > Hi all,
> > I'd like to change console settings on my TS7370 (specially bitrate 
> > 115200-> 9600)
> > How can I do that ?
> > 
> > Thanks a lot
> > 
> > Fred
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/