I've been using "512mbsd-7400-linux2629-lenny-eabi.dd" on the ts7300 for
months. It has a 2.6.29 kernel and supports the SD card.
The only thing I need is the open-eth driver, which has appeared in 2.6.31 and
I'm thinking of backporting it.
Ian T.
--- In "odonovan_dan" <> wrote:
>
> --- In Jason Stahls <jason@> wrote:
> >
> > Börje Granberg wrote:
> > > mike ingle wrote:
> > > > Any idea what to expect when trying to use it with a ts7300,
> > > > assuming that one is not using any ts ip in the fpga?
> > >
> > > I can't remember if anyone has worked on the 7300 with 2.6 or not, but
> > > look back in the archives you might find something. Generally if
> > > you're not worried about supporting the TS FPGA load then there really
> > > aren't any reasons why a vanilla kernel won't work.
> > >
> > > Is the SD card driver included in this kernel?
> > >
> > > //Börje
> >
> > 1) Your email client is doing some seriously funky things to messages
> > you send, could you please send your messages in text only
> >
> > 2) No, SD functionality would be a part of the IP in the TS FPGA load
> > which is not supported by a vanilla kernel.
> >
> > --
> > Jason Stahls
> >
>
> For the reason Jason mentioned above, I don't think the kernel source to
> rebuild the SD card driver is included.
>
> However, the initrd partition in this image (see link below) does include a
> pre-built SD Card driver as a kernel module, which does work with this kernel.
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2
>
> My TS7400 is now running the above image, including the debian distro, from
> the SD card.
>
> I followed the instructions in these posts to get it to work (many thanks to
> Petr Ledvina for posting these):
> http://tech.groups.yahoo.com/group/ts-7000/message/15914
> http://tech.groups.yahoo.com/group/ts-7000/message/15933
> http://tech.groups.yahoo.com/group/ts-7000/message/15934
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|