ts-7000
[Top] [All Lists]

[ts-7000] Re: 2.6.29-ts kernel source available

To:
Subject: [ts-7000] Re: 2.6.29-ts kernel source available
From: "bulkoboy11" <>
Date: Thu, 24 Sep 2009 14:13:39 -0000
Pierre

I've never used the VGA display in any of my applications, so I can't answer 
the question, sorry.

Ian T.


--- In  "bulkoboy11" <> wrote:
>
> I've been using "512mbsd-7400-linux2629-lenny-eabi.dd" on the ts7300 for 
> months. It has a 2.6.29 kernel and supports the SD card.
> The only thing I need is the open-eth driver, which has appeared in 2.6.31 
> and I'm thinking of backporting it.
>
> Ian T.
>
>
>
> --- In  "odonovan_dan" <danodonovan@> wrote:
> >
> > --- In  Jason Stahls <jason@> wrote:
> > >
> > > Börje Granberg wrote:
> > > > mike ingle wrote:
> > > > > Any idea what to expect when trying to use it with a ts7300,
> > > > > assuming that one is not using any ts ip in the fpga?
> > > >
> > > > I can't remember if anyone has worked on the 7300 with 2.6 or not, but
> > > > look back in the archives you might find something. Generally if
> > > > you're not worried about supporting the TS FPGA load then there really
> > > > aren't any reasons why a vanilla kernel won't work.
> > > >
> > > > Is the SD card driver included in this kernel?
> > > >
> > > > //Börje
> > >
> > > 1)  Your email client is doing some seriously funky things to messages
> > > you send, could you please send your messages in text only
> > >
> > > 2)  No, SD functionality would be a part of the IP in the TS FPGA load
> > > which is not supported by a vanilla kernel.
> > >
> > > --
> > > Jason Stahls
> > >
> >
> > For the reason Jason mentioned above, I don't think the kernel source to 
> > rebuild the SD card driver is included.
> >
> > However, the initrd partition in this image (see link below) does include a 
> > pre-built SD Card driver as a kernel module, which does work with this 
> > kernel.
> >
> > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/512mbsd-7400-linux2629-lenny-eabi.dd.bz2
> >
> > My TS7400 is now running the above image, including the debian distro, from 
> > the SD card.
> >
> > I followed the instructions in these posts to get it to work (many thanks 
> > to Petr Ledvina for posting these):
> > http://tech.groups.yahoo.com/group/ts-7000/message/15914
> > http://tech.groups.yahoo.com/group/ts-7000/message/15933
> > http://tech.groups.yahoo.com/group/ts-7000/message/15934
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU