Welcome Khalid,
> I need your help in guiding me on the getting started resources to join the
> embedded systems world. I have an MSc digree in Automation and Control and
> have some theoritical background on real-time systems. However, I don't have
> the required resources to catch up and get started on Embedded Systems. As a
> final note, I don't have a project or application on mind right now but I
> have the interest to aquire the knowledge.
A long time ago I got into embedded systems immediately following a
single 10-week course at The Ohio State University. In many ways that
course was very similar to the Parallax "Whats a Microcontroller?" kit:
http://www.parallax.com/Default.aspx?tabid=362
In the USA Radio Shack sells that kit for a reasonable $100. See the
links near the bottom of this page:
http://www.turbocontrol.com/monitor.htm
But it sounds like you may already be further down the road (you did
post in this forum!) so those kits may be too simple. But you can
download the PDFs for free from the Parallax website and see for yourself.
Regards,
Paul
http://www.turbocontrol.com/
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|